Search the forum,

Discuss Victorian tile porch/step entrance in the DIY Tiling Forum area at TilersForums.com.

Odin

TF
Reaction score
0
Points
36
Location
London
Hello,

I'm about to lay the porch area, it's very small 890mm x 470mm. I have the Victorian tiles and have layed it out and it's the right fit.

Now I'm wondering what to do at the grout stage, most advise sealing first then grouting. Clean and seal again. However because mine are outdoors and it seems important not to seal for frost resistance. What should I do once the tiles are set?

Also the design is with very small gaps in the tiles, is there a grout people would recommend?

Thanks,

Odin
 
Reaction score
0
Points
31
Location
North London
Hello,

I'm about to lay the porch area, it's very small 890mm x 470mm. I have the Victorian tiles and have layed it out and it's the right fit.

Now I'm wondering what to do at the grout stage, most advise sealing first then grouting. Clean and seal again. However because mine are outdoors and it seems important not to seal for frost resistance. What should I do once the tiles are set?

Also the design is with very small gaps in the tiles, is there a grout people would recommend?

Thanks,

Odin
Hey mate

Have just done one of these jobs I go to a very good suppliers called MGA in Chingford that have good knowledge of tiles and if u have descent porcelain or stone there is no point sealing. As to the grout previously when I have done this work I've used an Ardex grout can't remember the specific name but this time I was recommended Grout 3000 in Mid or Natural Grey if u need any other advice or can recommend any other methods or materials let me know.

Lew
Keogh Tiling

IMG_20200703_125639.jpg
 
Reaction score
6
Points
88
Location
London
Seal it with a good exterior impregnating sealer as they are guaranteed to stain. After thoroughly dry , grout with a standard cement grey ( I use mappei) Don’t leave it too long before cleaning it off. The smaller spacing allow you to clean it off sooner without disturbing the look of the grout. Clean it at least 3 times. Then recommend the client use a PH neutral tile cleaner which won’t break down your seal, then he can get you back in 2 years to reapply the seal or do it himself. ### my bad old thread
 
Last edited:

Reply to Victorian tile porch/step entrance in the DIY Tiling Forum area at TilersForums.com

There are similar tiling threads here

    • Like
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for...
Replies
1
Views
437
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
577
Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
787
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
618

Advertisement

New Tiling Questions

Replies you've not seen

Top