I’m tiling around a bath. The backing board is ply and is slightly wobbly. Should I secure it before I start tiling? The trouble is if I secure it then it’s not level as the bottom of the backing board sticks out slightly. If I leave it slightly wobbly then I will get a straighter finish...but then it isn’t 100% secure. Any advice would be much appreciated. Thanks, Tom
Search the forum,
Discuss Tiling the side of bath in the DIY Tiling Forum area at TilersForums.com.
Reply to Tiling the side of bath in the DIY Tiling Forum area at TilersForums.com
There are similar tiling threads here
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for...
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Hi!
I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Good morning all.
After a little advice. I'll post pictures a bit later. However....
The...
Hi all! Just wondering what the best advice is for book-keeping? Been self employed now for a...
Advertisement
Share This Page
New Tiling Questions
-
UK Question about tile sizesI have moved into a new house and want to tile the downstairs bathroom walls. Its not a big room but my wife likes the idea of a feature wall tile and then a grey / white tile on the other 3...
- Started by supersolid2
- Replies: 1
-
Another First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon | From Tilers Forums .co.ukAnother First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon It appears the other UK Tiling Forum is using a Free WordPress (that’s fine) but they went for wpForo instead of bridging...
- Started by Dan
- Replies: 0
-
USA Verde Alpi marble tiles 12 x 12I'm searching for 42 pieces of 12" x 12" Verde Alpi marble tiles. Preferably honed. 12" x 24" could work also. I am in San Diego, CA, USA, so would need packaging and shipment if not local. here...
- Started by EAC
- Replies: 0
-
Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers?Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers? I'll tell you a funny story about how I got a job with Topps Tiles Newcastle and got top sales...
- Started by Dan
- Replies: 2
-
Hey all not the real Bob Marley here Im afraidNice forum you have here. Seems very helpful. I have some work coming up soon so will post in the more relevant forum. I hope your businesses are flourishing! Be well
- Started by Bob Marley
- Replies: 1
Replies you've not seen
-
Preparation Floor prep after floodFloor needs to be dry 100% then Ditra Matting installation and of course tape the joints. That's the best you can do as a tiler. Send us some...
- Latest: Tile Marble Granite
-
New Good Morning Thread 2024All done now, was just the linkage could'nt get it into gear so not as bad as first thought. still a p##s off though- Latest: bsc ceramics
-
Job in Colchester, maybe leading to moreHi andy could you give me a call my name is noel and i am a professional bathroom tiler wih over 15 years experience tiling bathrooms,ensuites etc...
- Latest: noel brown
-
UK Question about tile sizesMatching grout lines isn’t an issue with different sized tiles . On the feature wall centralise left to right and top to bottom. Creates a better...
- Latest: Dave
-
Underfloor Running CostsBased on your room it's around 2.6kw per hour assuming its running permanently. Your heat loss needs to be calculated so you can find out how much...
- Latest: Ajax123