Split faced stone - finishing the edges. - TilersForums.com

[Time's Ran Out]

I did this one last year, feature wall in a living room...

View attachment 101682

View attachment 101683

I remember it - lovely job!




Let’s have more.....

 

[Time's Ran Out]

End feature wall.

 

[Qwerty]

Internal mitres are a pain as you lose at least 30mm each row and its a pain to match with the depth of another piece.
Got to return to deep clean & seal yet.

 

[WetSaw]

I've got my first bit of split face to do. Feature corner behind a wood stove I'm fitting. They're not interlocking ones though. I'll post some pictures if it's not too shabby!

 

[Qwerty]

I've got my first bit of split face to do. Feature corner behind a wood stove I'm fitting. They're not interlocking ones though. I'll post some pictures if it's not too shabby!

Similar to what I did above then? The old laminate is all being taken up this week and a thick slate hearth going in

 

[WetSaw]

More like this..

 

[Qwerty]

Should be easier to cut and match up

 

[WetSaw]

Should be. The flue is going to be a bit of a pain though as it's going through the left hand wall at 45°.

 

[WetSaw]

If anyone has any ideas on templating split face for a 150mm flue @ 45° I'm all ears!!

 

[Qwerty]

Can you not put a piece of plastic pipe in its place and work around that?