Search the forum,

Discuss Sockets on split face tiles in the Canada Tile Advice area at TilersForums.com.

dg-1984

TF
Reaction score
15
Points
288
Location
Glasgow
Hi all, I am going to be tiling a splash back on our kitchen.
We have found tiles that we like the look of, they are Wickes split face porcelain tiles which by the things I have read could be hassle.
These are the tiles:
A thought I just had was how you would get a socket to fit on these and look proper?
If fitting round into the window frame would you use corner trim or mitre the back off and try match them up? Know this could be a pain trim could be easier.
Or am I best returning these and keep looking for another time?
Thanks.
 

dg-1984

TF
Reaction score
15
Points
288
Location
Glasgow
So for the sake of information and expanding my knowledge how would you go about setting the sockets in correctly?

And also if you were going round a corner into a window would you try and continue the pattern?
 

Andy Allen

TF
Esteemed
Arms
Reaction score
18,311
Points
1,318
Location
Gloucester
All you could do is go behind the socket face plate as you would using any other tile, but the socket won't sit flat due to the uneven tile, so you would silicone around it to seal it.......looks pants imo...
Always continue the bond with any tile...
 
T

Tile Shop

Desperately trying to find a picture, from a customer we had a while back. Feature wall with sockets in. We were never told exactly how it was done, only saw the finished wall. But it appeared to me as if the tiler sorted the tiles based on the flattest of the relatively same thickness he could find, cut the tiles to size to fit the socket screws in and routered the top edge slightly so that the faceplate partially sat into the tile.

Will keep digging.
 

Reply to Sockets on split face tiles in the Canada Tile Advice area at TilersForums.com

There are similar tiling threads here

Hi all, I am planning to tile a full height panel of split face tiles to sit 3” behind a log...
Replies
5
Views
1K
    • Like
https://www.tilersforums.com/threads/shower-bath-tiling-preparation-plaster-and-wooden-windowsill...
Replies
1
Views
128
Hello there, Relatively recently we had a new en-suite fitted (complete rip out of the old...
Replies
5
Views
2K
Hi, I'm new to the forum and fairly new to tiling, my only previous "proper" job was my recent...
Replies
3
Views
2K
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

New Tiling Questions

Replies you've not seen

Top