SLC mixing bucket and dispenser.

[Blunt Tool]

Seen this a few times on different sites, thinking of making one for next full house slc pour I’ll have again in a few months time. Anybody got one, bought one, made one? Any advice appreciated. Take it you mix about 3 bags at a time to fill it?

 

[J Sid]

saw that somewhere to. Good idea if you do alot of big areas

 

[Blunt Tool]

If I have help with me I could maybe make 2, one pouring and Labrador mixing next batches

 

[Flintstone]

Id like to see your Labrador on the mixer.
Good idea, not sure how well 3 bags at a time would mix ?

 

[Blunt Tool]

Id like to see your Labrador on the mixer.
Good idea, not sure how well 3 bags at a time would mix ?

Maybe get him to mix then pour in, mix another etc till full

 

[One Day]

Put one of these on a decent mixer and it'll do three bags easily...

 

[Blunt Tool]

Do you think the one in picture is just a dustbin and some waste pipe with a valve

 

[WetSaw]

Do you think the one in picture is just a dustbin and some waste pipe with a valve

Yes.

 

[Blunt Tool]

Yes.

Any ideas about boss to bin?

 

[WetSaw]

Any ideas about boss to bin?

No. Isn't there a plumber on here you can ask?...

Looks like you'd want to fill the bottom of the bin up to the bottom of the pipe though or you'll have half a bag of SLC left in it, unless you can tip it up of course.

 

[Blunt Tool]

Yeah was going to ask one when one of them tile a day guys fell out with him!
Good idea about bottom of bin tho

 

[WetSaw]

PVC tank Connector 50/63mm - https://www.easy-irrigation.co.uk/50mm-pvc-c-77_156_157/pvc-tank-connector-p-1960?zenid=ref1q6764931aiaqq7c4uk46e5

A quick Google, that sort of fitting with a valve ( I'd use one that can be dismantled for cleaning) in the pipe.

 

[Blunt Tool]

PVC tank Connector 50/63mm - https://www.easy-irrigation.co.uk/50mm-pvc-c-77_156_157/pvc-tank-connector-p-1960?zenid=ref1q6764931aiaqq7c4uk46e5

Good call, so boss 60 to 50, waste 50 to 40, waste 40 to 32? So that it slows the flow down?

 

[Boggs]

McAlpine T11M

 

[Blunt Tool]

Tameson - https://tameson.co.uk/ball-valve/bv-2-way/bv-2w-pvc/bv-2w-pvc-true-union-socket/bmpm40-2-way-pvc-ball-valve-true-union-socket-40mm.html?gclid=EAIaIQobChMIgO-__vm-4QIV4r3tCh1veQIzEAkYEyABEgIOvfD_BwE

 

[Blunt Tool]

Rubbermaid Brute Waste Container Mobile Dolly With Wheels
Rubbermaid Brute Waste Container Mobile Dolly With Wheels for 75l and 121l Bins for sale online | eBay - https://rover.ebay.co.uk/rover/0/0/99?loc=https%3A%2F%2Fwww.ebay.co.uk%2Fp%2F1521656878%3Fiid%3D173862585002

 

[Dumbo]

Id like to see your Labrador on the mixer.
Good idea, not sure how well 3 bags at a time would mix ?

When i built my house we had a dry liner who would knock 3 bags of dry wall adhesive in a oj barrel no problems

 

[hmtiling]

I've done 5 bag mixes in bins easily. Pouring out of the bin was the difficult bit!

 

[Andy Allen]

 

[Qwerty]

The issue I can see using this bin is that the aggregate in the SLC will all sit at the bottom and not be distributed evenly across the floor.

Won't be much use on UFH or foam core boards either.

 

[Dumbo]

The issue I can see using this bin is that the aggregate in the SLC will all sit at the bottom and not be distributed evenly across the floor.

Won't be much use on UFH or foam core boards either.

What levelling are you using , I only ask as I find ultra level it 1 bad for aggregate sinking .

 

[Qwerty]

What levelling are you using , I only ask as I find ultra level it 1 bad for aggregate sinking .

Mapei Ultraplan Renovation Screed. My favourite and most trusted SLC, but if left for more than a couple of minutes unmixed it can settle

 

[hmtiling]

Whatever you mix in needs to have a flat base too

 

[Sean Kelly]

I'm sure I saw one of these on Dr Who.