Sigma kera cut issues

[Old Mod]

Some 10mm are extremely difficult to break on the length.
I get a higher success rate with two people with two breakers at same time, tightened slowly at same time.
It’s not the system, it’s the tile.
The Raimondi freecut struggles with the same tiles. (Make)

 

[Balloo]

41d separator

 

[Balloo]

Casa dolce casa 1500x 250

 

[Old Mod]

A plank tile?
You’re not asking too much of it with thin cuts are you?
Not trying to be clever, just curious.
Do you break one end and then go to the other and break again?
I think the best you could hope for is around
50-60mm Off cut.

 

[Balloo]

Thanks guys

 

[Italy]

I did 150x20 with freecut,
no problem.
is the same as cutting a 120 cm.
you should not have any problems with casabella,
it is still florim ...
geoff, I'm not the man of the big format.

 

[Italy]

I did 150x20 with freecut,
no problem.
is the same as cutting a 120 cm.
you should not have any problems with casabella,
it is still florim ...
geoff, I'm not the man of the big format.

View attachment 94950

and I sold freecut

 

[Gus]

I have a sigma kera cut ... bought to do 14 bathrooms on XL porcelain, but all the tiles were 3mm and 6mm thick. Never tried to cut 10mm tile with it.