Sigma kera cut issues

[Balloo]

Hi guys I bought the sigma kera cut in 2015 with everything that comes with it about £1800. reason for buying was cutting 1800mm stone , I thought it was cheaper than to buy riamondi wet saw and I could use later for large tiles .
Well on a few occasions I've been trying to cut 1500mm -2000mm x10mm tile and with the sigma breaker they just wont break clean . sigma claim they can cut up to 10mm thick but I would dispute that

 

[Dumbo]

Why don't you contact sigma and have chat with them . Maybe get your local rep to see you .

 

[Balloo]

Funny thing is the shops that I work with seem to be popularizing the small tile back into fashion

 

[Dumbo]

Maybe sell it then . But see if you can remove this thread first

 

[Qwerty]

I personally have no experience of it myself so unable to comment. @3_fall uses one regularly for thin porcelain as does @antonio and a few other people who may be able to offer up their opinion

 

[Old Mod]

I personally have no experience of it myself so unable to comment. @3_fall uses one regularly for thin porcelain as does @antonio and a few other people who may be able to offer up their opinion

Yes Geoff I use the Kera cut, Antonio uses the freecut. Sounds similar tho!

 

[Old Mod]

Exactly what are you trying to cut @Balloo?

 

[Balloo]

Yes Geoff I use the Kera cut, Antonio uses the freecut. Sounds similar tho!

3 fall do you have any issues like this on 10mm

 

[One Day]

Which breaker are you using with the 10mm. The old type hand plier is no good on anything above 6mm in my experience. You need the wind up breaker for 6mm to 20mm.

 

[Old Mod]

3 fall do you have any issues like this on 10mm

What make of tile is it?