sigma 100cm cutter - Tile Advice

[julian tanner]

any idea where i can get a case or cover for my cutter

 

[Old Mod]

Do they even make one that big!

 

[smudger85]

sigma only do one case I believe and that holds a maximum of 750mm

 

[White Room]

The biggest on I know of is 770mm....

 

[julian tanner]

i know they dont do a case but any idea what i can use instead

 

[White Room]

Why would you need one, there a tough old cutter.

 

[Old Mod]

any idea what i can use instead

A single duvet cover should work if you just want a cover.

 

[julian tanner]

Why would you need one, there a tough old cutter.

just want to cover it thats all mate

 

[Flintstone]

As said, box only goes to about 750, I have one as it helps keep some order in my small van.

 

[julian tanner]

As said, box only goes to about 750, I have one as it helps keep some order in my small van.

yeah already messaged sigma thanks anyway

 

[WetSaw]

Get down to B&Q with your cutting list and knock one up out of 15mm ply. It'll weigh as much as the cutter though!

 

[Rookery]

You can buy a padded keyboard case c/w handles & wheels for about £80. You'll probably need an 88 key one.

 

[julian tanner]

You can buy a padded keyboard case c/w handles & wheels for about £80. You'll probably need an 88 key one.

where from?

 

[WetSaw]

EBay?

 

[Rookery]

where from?

Something like this
Stagg KTC130 Soft Keyboard Case with Wheels 129x46x15cm | Andertons - https://www.andertons.co.uk/p/KTC130/keyboard-bags-cases/stagg-ktc130-soft-keyboard-case-with-wheels-129x46x15cm