Levelling systems & when to use them - TilersForums.com

[James De]

I would say yes on a tile that size. If


Why can’t you use cutter?

Honestly the tiles are like concrete! I’ve tried various ways and all have failed. Sigma might actually be coming out to take a sample of the tile

 

[acaciaguy]

How are you cutting them now.

 

[James De]

How are you cutting them now.

I left them and started on the other wall tiles

 

[acaciaguy]

Good luck. Hope you work out how to cut

 

[James De]

Good luck. Hope you work out how to cut

Wetsaw?

 

[Blunt Tool]

I left them and started on the other wall tiles

The tiles you are trying to cut are the ones from CTD and I have tiled a wet room lately with the 600x300 tile, they cut no probs at all on my Sigma 3C3M. I do suspect it’s just a case of setting your cutter up right. Have a look online at Sigma there are instructions to set up and cutting/breaking techniques

 

[James De]

The tiles you are trying to cut are the ones from CTD and I have tiled a wet room lately with the 600x300 tile, they cut no probs at all on my Sigma 3C3M. I do suspect it’s just a case of setting your cutter up right. Have a look online at Sigma there are instructions to set up and cutting/breaking techniques

I’ll have a look, cheers mate

 

[Waluigi]

we need a sigma tips thread.....

There’s probably a few dozen on here already.

To be honest, I only scanned the manual. Need to have sit down and proper read whilst sat on the loo.

 

[acaciaguy]

Any links to sigma manual? Or tips thread would be great

 

[Waluigi]

I had a quick look online but couldn’t find anything. Also had a quick look on YouTube. Not much on the height adjustment.

I think I’ll start a thread.