Search the forum,

Discuss Kitchen splashback advice in the Canada Tile Advice area at TilersForums.com.

Hi folks, new to the forum and I'm a DIY novice with no tiling experience to speak of. Been reading through the forum recently and got some great tips and I'm considering a tiling course further down the line.

Quick question for those with more experience; started tiling my kitchen splashback this weekend. U shaped kitchen, mixed mosaic tile behind the cooker then using 600x300 elsewhere. Original plan was 1.5 tiles high at wall behind sink and window in line with end of the cabinets, now thinking of 2 tiles high instead? Is 600 too high for a splashback?

Will try and upload a couple of images!

Much appreciated.
 
Hopefully this works
IMG_20180930_215847.jpg
IMG_20180930_215859.jpg
MVIMG_20180930_215910.jpg
IMG_20180930_215825.jpg
 
Welcome and enjoy the forum.
I would normally tile splash backs to the height of the underside of the wall mounted units. This can vary but 600mm is a bit high, although 2 full tiles can look better than cuts. Or you can tile them portrait 600mm high.

Thanks for the response. Yeah think the 600 might be a little high myself. In hindsight I probably should have taken a little off the bottom row to so the grout line was more central?? Ah well, too late now!!
Cheers
 

Reply to Kitchen splashback advice in the Canada Tile Advice area at TilersForums.com

Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

Replies you've not seen

Top