Search the forum,

Discuss Keracolor FF vs Ultracolor 1.5mm Joints in the Tile Adhesive / Grout Advice area at TilersForums.com.

Reaction score
0
Points
36
Location
York
Hi, we are tiling the back wall of our new shower enclosure with 33x33cm ceramic gloss tiles (photo attached). The catch is they have a mosaic effect false grout line through them, lines measuring around 1.5mm. As a result I want to use a 1.5mm spacer between tiles so there is no distinction in the gaps. Ultracolor specifies a 2mm grout line minimum but seems the better grout. Will I get away with it in 1.5mm? Is it too thick to lie in the false lines and stay-put? Would Keracolor be better? Thanks in advance.

cardiff-fabric-33cm-x-33cm-wall-tile-p1574-12916_image.jpg
 

Reply to Keracolor FF vs Ultracolor 1.5mm Joints in the Tile Adhesive / Grout Advice area at TilersForums.com

There are similar tiling threads here

Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
923
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
680
    • Like
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for...
Replies
1
Views
536
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
656
Hi all. Just wanting some advice and wondering what the pros in here are using nowadays for...
Replies
4
Views
687

Advertisement

New Tiling Questions

Replies you've not seen

Top