Is this ply board ok to tile onto?

[Element]

I'm quoting for a 40sqm floor job that needs ply boarding onto wooden floor boards. Looking for the best deal on fouteen 18mm boards and so far the cheapest up here seems to be this one from Wickes:

Structural Spruce Plywood - Plywood - Sheet Materials -Building Materials - Wickes

If screwed down every 20cms, would it be ok? Has anyone used it before? The tiles are likely to be 45cms x 45cms ceramics. I have used B&Qs ply but this is £5 cheaper each board.

Many thanks for your values opinions

 

[AliGage]

Try Ridgeons, they're pretty good on timber and sheet material if you have a trade account with them.

 

[Element]

Try Ridgeons, they're pretty good on timber and sheet material if you have a trade account with them.

Thanks - but they've no sites in Scotland...

 

[Del W]

Are you going to tile directly onto the ply ?

 

[doug boardley]

you'll need to make sure your floorboards are deflection (bounce free) before overboarding. personally I'd then add a cement board over the ply.

 

[AliGage]

Thanks - but they've no sites in Scotland...

Good point. They're all based in East Anglia, forgot about that.

 

[Perry]

Spruce is softwood i believe so you would need wpb if you are going to tile on it directly

 

[kilty55]

what kind of condition are the floorboards? cant you just use hardi backer direct.....deal on atm in a certain shop have a hunt about

 

[Element]

Had my doubts over this spruce ply tbh... floorboards pretty dire condition, but figured 18mm ply would suffice then tile on top with flexy addy...

 

[hillhead]

Ply is crap for tiling straight onto, cement boards or ditra the whole lot.
Too much deflection in ply, it's mostly sourced from China these days and is unsuitable for tiling onto.