How To Remove Gloss Paint??? - TilersForums.com

[Rizzle from the Portizzle]

ok heres one out of the box re paint with gloss using a roller now lay in isomat 1mm float back with trowel wait to dry now tile isomat who nows might work .think out of the box to solve every day problems .

 

[dean.diy]

heat gun AND limbide scraper. Last one I did unfortunately took 1 & 1/4 days or thereabouts.

 

[lizzardtong]

Steamer and narrow 20mm scraper with 45* cut and chisel gring on the edge. Works brilliant

 

[macten]

I've always wondered about the effectiveness of putting something like ecoprim on well adhered gloss paint.
Let's face it - steamer, heater, sander whatever... it's always a pain in the butt, thankless task.

 

[Aston]

Ok, so you wont use a heat gun.
and you wont sand it up to form a key and use a primer over the top
and you wont overboard (always a good option)
then it just leaves one option doesn't it, knock the bleedin wall down and build a new one only kidding

You could use a paint stripper? something along the lines of this from polycell View: https://www.youtube.com/watch?v=RZB5PcdVwbg