Hi Advice needed on wet room fall. - TilersForums.com

[ACCOLADE]

Hi everyone. Looking at this floor.. Iam thinking I need to self level over the U.F.H. trouble I have is processing this thought !
If I self level over wires. Would self leveler smooth it out flat. And I lose my fall on wet room floor?
Or would it just self level with the gradient of the wet room ? Only have 10mm drop over 800mm length.

 

[J Sid]

You can slc a fall on tray be isn't easy. You'd be better off to slc the flat and render the falls with tile adhesive

 

[ACCOLADE]

I am using 6mm mosaics so s.l. a fall with adhesive will not be smooth.

 

[J Sid]

With a notched trowel trowel floor with trowel size you need, 6mm. When ribs are set enough infill teeth gaps to make a solid smooth finish. Job done

 

[Joshjupp]

Rapid setting self smoothing will do it you need to trowel it were you want it

 

[Dave]

What type of tray have you used ?
Not all can accept mosaics under 50mm x 50mm due to point loading.