Has anyone got a proxxon kgs 80 for cutting trims - TilersForums.com

[Joshjupp]

Thinking about getting a proxxon for all the trim work who’d got one and are they any good for the money

 

[Old Mod]

There’s a few guys Josh, and everyone who has one rates it.
But then at around £300 they should be. 😊

But then you know mitres are the way to go 🤣

 

[Steve6690]

I have one and it's excellent. I haven't used it very much but really rate it.

 

[Boggs]

I use one of these

https://www.NoLinksToThis/p/evoluti...ic-single-bevel-compound-mitre-saw-240v/7277p

Bought it in B&Q for £30 a couple of years ago, I use it for all metal trim cutting.
Just lay the trim on a price of batten, perfect 45s every time.

 

[Joshjupp]

There’s a few guys Josh, and everyone who has one rates it.
But then at around £300 they should be. 😊

But then you know mitres are the way to go 🤣

Found one for £220 and 100% mitres are the way forward I’ve got 22 splashbacks to do in January and don’t really fancy doing mitres with a hacksaw on all of them

 

[Old Mod]

I’ve got 22 splashbacks to do in January and don’t really fancy doing mitres with a hacksaw

🙈

 

[Steve6690]

Host-IT - Holding page

best price I managed to find.

 

[Tony_C]

Found one for £220 and 100% mitres are the way forward I’ve got 22 splashbacks to do in January and don’t really fancy doing mitres with a hacksaw on all of them

Talk about January blues 😂

 

[CJ]

I’ve actually been looking at them this week.........was going to be an early Christmas pressie to myself, but the tight wad in me needs a kick up the ar5e to spend that much on gear that wouldn’t get used loads 🤨

 

[Old Mod]

but the tight wad in me

Nice to see you about again Colin mate. 😊