Grinder attachment advise - TilersForums.com

[merit]

Hi all
I need to get myself set up with dust extraction after asking a customer to move there 40k jag so not to get dust over it, don't need a re spray job at the minute so
Has anyone got advice on a good vacum attachment for my grinder
And a vacum that's tried and tested
It's more for cutting porcelain than grinding
I know these vacums arnt cheap ,but still looking for value for money
Thanks in advance

 

[Old Mod]

I’ve not got or even tried one of these, however, they do a floor grinder attachment which is really rather good for the money, so it’d be a fair bet that this will be ok too. They’re universal, so should just about fit anything.

HERZO Dust Extraction Cutting Guard for 115/125mm Angle Grinder https://www.amazon.co.uk/dp/B01G501XTK/ref=cm_sw_r_cp_api_i_6-jaBb5MVD493

Dust extractors are a huge expense, but worth their weight in gold if you get the right one.
It largely depends on what you want it for, apart from cutting porcelain.
And also if it’s to be used on site or domestic use only

 

[Flintstone]

Your link doesn’t work for me marc..

For long term use I feel a dust extraction set up on the grinder would be quite restrictive, although for occasional use I’m sure it would be ok.

 

[Old Mod]

Your link doesn’t work for me marc..

That’s because you’re disagreeing with everything.

 

[Flintstone]

It’s because I’ve clicked on it and it doesn’t open ?

 

[Old Mod]

Try again