Dickies Workwear for Tilers?

[Dan]

Dickies Redhawk Super Work Trousers | WD884 | Dickies Workwear - http://www.dickiesstore.co.uk/product/WD884-dickies-redhawk-super-work-trousers

Anybody use these?

Free knee pads. Ones that seem to stay in too.

 

[Bill]

Aldi ones for £9 are just as good.

 

[Dan]

Free knee pads though? Lol

 

[Italy]

i use, jeans cofra and scruffs (Recommended by andyallen)
scruffs keep warm.
Free knee pads all

 

[Dan]

Aldi ones for £9 are just as good.

NGT - 400 weeks of testing (article) — Snickers Workwear - http://www.snickersworkwear.co.uk/design-and-features/new-generation-trousers/ngt-400-weeks-of-testing-article/

Doubt they'd last 4 weeks let alone 400 like these snickers one eh?

 

[Bill]

NGT - 400 weeks of testing (article) — Snickers Workwear - http://www.snickersworkwear.co.uk/design-and-features/new-generation-trousers/ngt-400-weeks-of-testing-article/

Doubt they'd last 4 weeks let alone 400 like these snickers one eh?

Their pants didn't last 400 weeks either .... they had 50 blokes with 4 pairs each over 2 years,,, I buy, roughly, two pairs of Aldi ones a year so by my testing - it is exactly the same ratio but for half the cost - win win .

 

[Flintstone]

Those cheap dickies and other cheap work trousers are rubbish, I wear dickies Eisenhower work trousers, worth the extra money

 

[smokie899]

I have the snickers floor layer? ones, supposed to have a bit of Kevlar in the knee section/pocket part.
Expensive but worth it. Come with big thick comfy knee pads, which go inside each leg.
Have wore them over two years and not a mark on them, ok ok OK maybe a tube of silicone but no wear and tear.
I also do a lot of wooden floors so spend a fair bit of time on my knees, which was I paid the money for them.

 

[J Sid]

I have the snickers floor layer? ones, supposed to have a bit of Kevlar in the knee section/pocket part.
Expensive but worth it. Come with big thick comfy knee pads, which go inside each leg.
Have wore them over two years and not a mark on them, ok ok OK maybe a tube of silicone but no wear and tear.
I also do a lot of wooden floors so spend a fair bit of time on my knees, which was I paid the money for them.

I bought those ones because of the Kevlar knee's, went though them in under 2 month's, worst buy ever.

 

[Flintstone]

That's like 4 months of everyone else's working hours!

 

[One Day]

I bought those ones because of the Kevlar knee's, went though them in under 2 month's, worst buy ever.

Snickers floorlayers aren't kevlar knees - it's just cordura with a bit of kevlar in the mix and it doesn't last long if you're dragging your knees around on rough concrete!
If I'd gone through a pair in 8 weeks I'd be sending them back... Mine normally last a year or so - 2 pairs on rotation.

(Still the best knee pads / trouser combo though)

 

[smokie899]

But I'm from West Belfast, I only bought them for the Kevlar in the knee section in case I got knee capped lol

 

[smokie899]

Snickers floorlayers aren't kevlar knees - it's just cordura with a bit of kevlar in the mix and it doesn't last long if you're dragging your knees around on rough concrete!
If I'd gone through a pair in 8 weeks I'd be sending them back... Mine normally last a year or so - 2 pairs on rotation.

(Still the best knee pads / trouser combo though)

Yup if I remember there's about one percent or less of Kevlar in them, bit of a gimmick tbh

 

[White Room]

But I'm from West Belfast, I only bought them for the Kevlar in the knee section in case I got knee capped lol

Why does your location make a difference ?

 

[J Sid]

Snickers floorlayers aren't kevlar knees - it's just cordura with a bit of kevlar in the mix and it doesn't last long if you're dragging your knees around on rough concrete!
If I'd gone through a pair in 8 weeks I'd be sending them back... Mine normally last a year or so - 2 pairs on rotation.

(Still the best knee pads / trouser combo though)

yes, was 2 months laying floors. But if I was fixing wall tiles for 2 years to I would be happy with them as well

 

[smokie899]

its a Belfast joke.
Sorry back on topic. I've two pair of snickers, the floor ones and the tanish coloured ones and both are good, maybe the tan ones are just a tad heavy, actually they weigh a ton

 

[Dave]

Just bought some Scruffs 3D trade trousers today from screwfix .

 

[One Day]

I got some Blaklader trousers a while ago. Similar to floorlayers but lighter cotton. They're great too.

 

[Spud]

I have the hyena ones they are good work trousers

 

[Old Mod]

Sunday market, new genuine Army camo's £10
Last my £10 easy.

 

[Old Mod]

I have the hyena ones they are good work trousers

Do they laugh when you try to get them clean gary?

 

[Old Mod]

But I'm from West Belfast, I only bought them for the Kevlar in the knee section in case I got knee capped lol

Brilliant!

 

[White Room]

But I'm from West Belfast, I only bought them for the Kevlar in the knee section in case I got knee capped lol

Should have picked up on that, with you now.

 

[Ttt1601]

I now use the site ones around £35 from screwfix. Knee pads stay bang on the knee alday they last a decent amount of time too, have tried many other expensive and cheap ones, but seem to get kneepads hanging around my shins or just slightly to the side of my knee which always make for a happy day lol

 

[PaulSmith]

Scruffs 3D trade and Snickers.

 

[Ben Ross]

get a pair of work dungarees with knee pads perfect for taking off to jump in van and go home clean

 

[widler]

Wife has got me a couple of pairs of Fristad pants to try, seem good pants , very tough and comfy.
I'm not a big fan of the pads being fit from the inside of the leg, but they are still nice kecs Fristads Kansas - Home - http://www.fristadskansas.com/

 

[Italy]

Wife has got me a couple of pairs of Fristad pants to try, seem good pants , very tough and comfy.
I'm not a big fan of the pads being fit from the inside of the leg, but they are still nice kecs Fristads Kansas - Home - http://www.fristadskansas.com/

sweden? aahha
I know her very well, was a sponsor of my son.
when he raced MTB .