Cutting a 3 way mitre with tile trims.

[DHTiling]

This has been discussed a few times and i found this video that might help those that need help/advice on this way of mitre'ng trims..

Help Thread - With Pictures. http://www.tilersforums.com/threads/cutting-tile-trim-3-way-mitre-with-pictures.3605/


[video=youtube;Dg4DLZ7oqqU][/video]

 

[Topo]

It looks great and easy to do but you didn't say where the first peice, second, and third go?

 

[Gazzer]

It looks great and easy to do but you didn't say where the first peice, second, and third go?

I before the E... and I am sure you can work out what piece goes where !

 

[Topo]

u now wot I mean :rockon2:

Will work it out m8 but it would have been easier if you explained in the video.

Cheers :smilewinkgrin:

 

[Gazzer]

u now wot I mean :rockon2:

Will work it out m8 but it would have been easier if you explained in the video.

Cheers :smilewinkgrin:

Maybe you should go to the original You Tube clip and ask him.

 

[DHTiling]

The video was not made by us.... and IMO it is plain to see in the video how to do it... well for a tiler it should be..shall i say.

 

[tictic]

forgot i put this video on u tube lol.....

topo...com on its all there for you....

ps..Dave there is another one i did,...putting a few holes in a ceramic tile with pin hammer and claw hammer...old school....maybe you could put that one up also...am carp at doing all that computer stuff...:smilewinkgrin:

 

[Topo]

Yes I think I worked out when to cut the mitre vertically and when to cut it flat. It doesn't come out perfect though but I file them to match. I will show you pictures soon.

Sorry about the confusion earlier

 

[Gazzer]

forgot i put this video on u tube lol.....

topo...com on its all there for you....

ps..Dave there is another one i did,...putting a few holes in a ceramic tile with pin hammer and claw hammer...old school....maybe you could put that one up also...am carp at doing all that computer stuff...:smilewinkgrin:

Well ok but we have How to drill holes in hard tiles with diamond core holesaw drilling bits these days for holes
[video=youtube;35c7ig-qMdA]http://www.youtube.com/watch?v=35c7ig-qMdA&feature=mfu_in_order&list=UL[/video]

 

[jwatson]

to get a 3 way mitre to work. firstly the corner to be tiled has to be perfectly square and plumb,and the trim has to be a proper quadrant, if not custom cut needed.

Yes I think I worked out when to cut the mitre vertically and when to cut it flat. It doesn't come out perfect though but I file them to match. I will show you pictures soon.

Sorry about the confusion earlier