L
lenovo1983
I am trying to cut 600x600 gloss porcelain tiles with an electric tile cutter from Screwfix but there are continuous chips along the cute edge.
I'm using plenty of water
It is a new cutter, as supplied with the machine (Although it isn't sharp to touch)
I feed the tiles through very slowly.
I've covered the cutting location with tape
I've tried cutting with the finished side up and down.
There is about 0.5 - 1mm wobble on the cutting disc - could this be the issue?
Thanks for any help, I'm getting really frustrated now.
I'm using plenty of water
It is a new cutter, as supplied with the machine (Although it isn't sharp to touch)
I feed the tiles through very slowly.
I've covered the cutting location with tape
I've tried cutting with the finished side up and down.
There is about 0.5 - 1mm wobble on the cutting disc - could this be the issue?
Thanks for any help, I'm getting really frustrated now.