Ceramic Tile Chipping - TilersForums.com

[Casper]

Hi

The electric tile cutter that I have bought cuts perfectly until the very end of the cut when it chips off a corner of the glaze which is stressing me greatly. I have replaced the wheel with a more expensive branded one but the same thing happens. Is there anything that can be done to stop this happening ??

Thanks

 

[Diggy]

cut in about an inch from one end then cut from the other end , that should help you out.

Diggy

 

[Casper]

I had thought of doing that but would have to be accurate with the second cut to make sure that the two line up. Could I cut the inch cut with the glazed face down so that the guide bar on the cutter can be left in the same position.

 

[White Room]

What about a manual cutter...

 

[Diggy]

scribe a line first and follow it?

Diggy :0)