S
Steve H
Hi Guys, thank you very much for the responses to my question on the pocket door. I went with 18mm marine ply and 6mm Jackoboard. I am now prepping for tiling. Because of the build up of the wall, I am thinking about putting 2 pieces of 12mm trim up the edge of the wall. 1 piece to mask the ply and jackoboard and the other to mask the edge of the tiles. I know that will give me an inch of trim, but I am using polished metal trim and it will be near the polished metal shower cubicle, I don't think it will look bad.
But I am sure you guys will know otherwise, if it is just wrong! Is there a problem having 2 pieces of trim in the same slot, I expect it to be quite a thick coat of adhesive with it being in the shower cubicle.
Suggestions, corrections please.
But I am sure you guys will know otherwise, if it is just wrong! Is there a problem having 2 pieces of trim in the same slot, I expect it to be quite a thick coat of adhesive with it being in the shower cubicle.
Suggestions, corrections please.