J
J-a-m-e-s_7
Hi, I have got my kitchen extension floor to tile (6x3m). The floor is anhydrite screed which i had done about 6 weeks ago approx 40mm depth. This will be the first time i will have tiled on a gypsum based screed and after a bit of reading have come across all the possible problems (Mostly down to either bad prep, moisture content or lack of knowledge about the substrate).
I have removed the laitance using an orbital floor sander/prep machine
The tiles i am using are Grespania 600x600 Porcelain Dock
My plan is as follows:
To prime with tilemaster primer either prime+ or grip
Anhyfix to fit ditra
Then use a standard cement based adhesive from then on. Either Mapei or Weber most likely
I am wondering if this is the best route or can anyone suggest a better method as to how they would tackle it. I'm not a tiler by trade (Builder/plasterer)
Any advice would be appreciated
I have removed the laitance using an orbital floor sander/prep machine
The tiles i am using are Grespania 600x600 Porcelain Dock
My plan is as follows:
To prime with tilemaster primer either prime+ or grip
Anhyfix to fit ditra
Then use a standard cement based adhesive from then on. Either Mapei or Weber most likely
I am wondering if this is the best route or can anyone suggest a better method as to how they would tackle it. I'm not a tiler by trade (Builder/plasterer)
Any advice would be appreciated