Just picked up a kitchen floor with 800mm square polished porcelain. What thickness of ribs would you advise for the floor AND for the back of the tile. Previously laid a lot of 600mm porcelain but this is my first job with a bigger tile. Ill be using a levelling system with it.
- Thread starter Etherglide
- Start date
- Replies 1
- Views 1K
- adhesive thickness
Search the forum,
Discuss Adhesive thickness in the Tile Adhesive / Grout Advice area at TilersForums.com.
Reply to Adhesive thickness in the Tile Adhesive / Grout Advice area at TilersForums.com
There are similar tiling threads here
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Hi!
I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
10 Tiling Tips for Fixing Tiles to Bathroom Walls = From UKTilingForum.co.uk
There are a few...
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for...
Good morning all.
After a little advice. I'll post pictures a bit later. However....
The...
Advertisement
Share This Page
New Tiling Questions
-
UK Question about tile sizesI have moved into a new house and want to tile the downstairs bathroom walls. Its not a big room but my wife likes the idea of a feature wall tile and then a grey / white tile on the other 3...
- Started by supersolid2
- Replies: 1
-
Another First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon | From Tilers Forums .co.ukAnother First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon It appears the other UK Tiling Forum is using a Free WordPress (that’s fine) but they went for wpForo instead of bridging...
- Started by Dan
- Replies: 0
-
USA Verde Alpi marble tiles 12 x 12I'm searching for 42 pieces of 12" x 12" Verde Alpi marble tiles. Preferably honed. 12" x 24" could work also. I am in San Diego, CA, USA, so would need packaging and shipment if not local. here...
- Started by EAC
- Replies: 0
-
Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers?Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers? I'll tell you a funny story about how I got a job with Topps Tiles Newcastle and got top sales...
- Started by Dan
- Replies: 2
-
Hey all not the real Bob Marley here Im afraidNice forum you have here. Seems very helpful. I have some work coming up soon so will post in the more relevant forum. I hope your businesses are flourishing! Be well
- Started by Bob Marley
- Replies: 1
Replies you've not seen
-
Preparation Floor prep after flood131 views and not a single response! Well this forum has changed! Lol. Where's all the old boys gone!? Lol. I have my answers now anyway. 👍🏻
- Latest: AliGage
-
New Good Morning Thread 2024All done now, was just the linkage could'nt get it into gear so not as bad as first thought. still a p##s off though- Latest: bsc ceramics
-
Job in Colchester, maybe leading to moreHi andy could you give me a call my name is noel and i am a professional bathroom tiler wih over 15 years experience tiling bathrooms,ensuites etc...
- Latest: noel brown
-
UK Question about tile sizesMatching grout lines isn’t an issue with different sized tiles . On the feature wall centralise left to right and top to bottom. Creates a better...
- Latest: Dave
-
Underfloor Running CostsBased on your room it's around 2.6kw per hour assuming its running permanently. Your heat loss needs to be calculated so you can find out how much...
- Latest: Ajax123