Search the forum,

Discuss acrylic prime asphalt floor? in the UK Tiling Forum area at TilersForums.com.

D

DHTiling

Directions as recommended by BAL........

MASTIC ASPHALT BASES:
• Check that mastic asphalt is suitably sound (without
brittleness, softening. etc.) with adequate cohesive strength,
with a natural float finish and laid on a firm rigid base.
• Ensure that surface is sufficiently regular to suit bedding
depths of adhesive.
• Clean thoroughly to remove surface dirt using warm water
and a suitable detergent. Remove all detergent residues with
clean water.

and if it is a smooth shiny finished asphalt then yes prime.....:thumbsup:
 
Last edited by a moderator:
D

DHTiling

Also if it is a shiny surface ryan..you could use a slurry coat for stronger adhesion............:grin:
 

Reply to acrylic prime asphalt floor? in the UK Tiling Forum area at TilersForums.com

There are similar tiling threads here

    • Like
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for...
Replies
1
Views
575
    • Like
A little help guys. I've been asked to price 71sqm of limestone flooring. My issue is this...
Replies
2
Views
292
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
713
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
702
Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
1K

Advertisement

New Tiling Questions

Replies you've not seen

Top