What disc for cleaning up tile edges? - TilersForums.com

[kcdionysus]

Hi

I’ve seen the video for the Montolit STL discs that can cut and grind but before I bite the bullet and spend £90 odd on a 4” grinder disc, I wondered if there are any other cheaper alternatives for grinding down or cleaning up tile edges (or bevelling even)?

Don’t have many issues with ceramics but the odd porc gives me a poor edge occasionally that’s frustrating if on a window reveal. Any advice or recommendations?

 

[GoneGuy]

Have a look at the forum sponsor @Pro Tiler Tools. Click on the banner at bottom of the page

 

[Blunt Tool]

This one is very good
115mm Electroplated Diamond Grinding Disc - ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/115mm-electroplated-diamond-grinding-disc/

 

[Chris N]

This one is very good
115mm Electroplated Diamond Grinding Disc - ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/115mm-electroplated-diamond-grinding-disc/

Just what I'm looking for too...cheers

 

[Julian 'Farmer' Bonsall]

New tool Saturday.

This is the disc.

The concept is for me to try this as originally I was looking at a backing pad and pads (which may still happen). I can post some images later of its effect if you want.

 

[Blunt Tool]

New tool Saturday.

This is the disc.

The concept is for me to try this as originally I was looking at a backing pad and pads (which may still happen). I can post some images later of its effect if you want.

View attachment 98056

They are good and was recommended by @3_fall which is good enough for me.

 

[Old Mod]

Use cutting disc first where possible, finish edge with grinding disc.
If you mitre start to finish with that it’ll wear too quickly.

 

[Julian 'Farmer' Bonsall]

3_fall back in 2017 (tools forum) posted some videos 'The difference between wet and dry cutting with a grinder.' Which is worth a look reference this topic. I haven't tried a wet sponge the rear of the blade.
I will try and replicate later and see what the electroplated grinding disc does.

 

[Old Mod]

. I haven't tried a wet sponge the rear of the blade.
I will try and replicate later and see what the electroplated grinding disc does.

I’m sure it’s the way I’m reading it, but don’t use sponge on grinding disc, only cutting.

 

[Julian 'Farmer' Bonsall]

It's a possibility 3_fall -I wouldn't like to pass judgement just at this stage

The difference between wet and dry cutting with a grinder

The link is that one is using this fandangled electroplated disc to improve the tile edge and you posted some videos of wet cutting with a grinder.

 

[Old Mod]

To tag anyone in a post @Julian 'Farmer' Bonsall add an @ before their name.


Yeah all I meant was it’s ok to use a sponge with a cutting blade, but don’t use it on the grinding disc.

 

[Julian 'Farmer' Bonsall]

Ok (wasn't specifically trying to tag you tho -to reduce annoyance over a less importance).

 

[Flintstone]

I also use that disk, it’s good for fine smoothing and removing limited amount of material, it’s not for removing 5mm off a cut etc

 

[kcdionysus]

This one is very good
115mm Electroplated Diamond Grinding Disc - ATS Diamond Tools - https://www.atsdiamondtools.co.uk/product/115mm-electroplated-diamond-grinding-disc/

That’s exactly the sort of thing I was looking for....thanks.