Search the forum,
Discuss Tiling to an old house with quite a wonky wall. in the Canada Tile Advice area at TilersForums.com.
O
Old Mod
You sure it wasn’t a sat night Dave? 🤣🤣
Looks good tho. 😊
Looks good tho. 😊
L
LM
Not much else you could have done with it, looks well.
A plain tile might have helped the bricks out😆
That looks really good. How long did it take you, was there a lot of hand cutting involved?
1.5 days. Tiles are 300 sqr
Going to be fun putting the skirting on...
That’s the joiners problem. But kerf cutting required lol
Reply to Tiling to an old house with quite a wonky wall. in the Canada Tile Advice area at TilersForums.com
There are similar tiling threads here
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Good morning all.
After a little advice. I'll post pictures a bit later. However....
The...
10 Tiling Tips for Fixing Tiles to Bathroom Walls = From UKTilingForum.co.uk
There are a few...
Hi!
I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Hi all.
Just wanting some advice and wondering what the pros in here are using nowadays for...
Advertisement
Share This Page
New Tiling Questions
-
UK Question about tile sizesI have moved into a new house and want to tile the downstairs bathroom walls. Its not a big room but my wife likes the idea of a feature wall tile and then a grey / white tile on the other 3...
- Started by supersolid2
- Replies: 1
-
Another First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon | From Tilers Forums .co.ukAnother First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon It appears the other UK Tiling Forum is using a Free WordPress (that’s fine) but they went for wpForo instead of bridging...
- Started by Dan
- Replies: 0
-
USA Verde Alpi marble tiles 12 x 12I'm searching for 42 pieces of 12" x 12" Verde Alpi marble tiles. Preferably honed. 12" x 24" could work also. I am in San Diego, CA, USA, so would need packaging and shipment if not local. here...
- Started by EAC
- Replies: 0
-
Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers?Have you ever worked for a National Tile Supplier or even just smaller big chain tile suppliers? I'll tell you a funny story about how I got a job with Topps Tiles Newcastle and got top sales...
- Started by Dan
- Replies: 2
-
Hey all not the real Bob Marley here Im afraidNice forum you have here. Seems very helpful. I have some work coming up soon so will post in the more relevant forum. I hope your businesses are flourishing! Be well
- Started by Bob Marley
- Replies: 1
Replies you've not seen
-
Job in Colchester, maybe leading to moreHi andy could you give me a call my name is noel and i am a professional bathroom tiler wih over 15 years experience tiling bathrooms,ensuites etc...
- Latest: noel brown
-
UK Question about tile sizesMatching grout lines isn’t an issue with different sized tiles . On the feature wall centralise left to right and top to bottom. Creates a better...
- Latest: Dave
-
Underfloor Running CostsBased on your room it's around 2.6kw per hour assuming its running permanently. Your heat loss needs to be calculated so you can find out how much...
- Latest: Ajax123
-
Another First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon | From Tilers Forums .co.ukAnother First for UK Tiling Forum; Crossing the 1 Million Posts Mark Soon It appears the other UK Tiling Forum is using a Free WordPress (that’s...
- Latest: Dan
-
New Good Morning Thread 2024Oh what a nice start to the week!!! You doing a rental while it's in garage? What make and year is it matey, need a hand finding a clutch for it...
- Latest: Dan