Tile board bath panel - TilersForums.com

[acaciaguy]

Hello all

I need a recommendation for a bath panel sized tile backer board.

Only slight issue is that bath is extra deep. Floor can’t be entered to get any extra depth for waste and lip of bath will sit at 61cm. Meaning panel needs to be approx min of 58cm.

Any recommendations greatly appreciated.

 

[One Day]

20mm delta, wedi, marmox. 600x1200 stock size and bond a piece on the end .

 

[Waluigi]

Orbry....

I tend to bond a couple of pieces on the back for extra strength.

Any ‘long board’ will be plenty long enough. No need for joins.

Orbry is 2440mm x 600mm

I’ve got a pic somewhere hang on

 

[acaciaguy]

Good man thank you. It’s the way to do it. I hate plastic bath panels.

 

[Waluigi]

I do an equal amount of both. Instead of the acrylic, I get my manufacturer to make the acrylic coated MDF furniture panels. A top fascia and a bottom plinth.

The plinth is set back like kitchen units and can make a small bathroom seem bigger.

 

[One Day]

Orbry....

I tend to bond a couple of pieces on the back for extra strength.

Any ‘long board’ will be plenty long enough. No need for joins.

Orbry is 2440mm x 600mm

I’ve got a pic somewhere hang on

View attachment 105770

Must be having a senior moment. Forgot about the 2400x600 panels!

 

[Bill]

How much are those 2400x600 panels?

I have been using these.... The height adjuster for a tight fit has been very useful

Q-Board Bath Panel 1850mm 600mm 30mm | DIY at B&Q - https://www.diy.com/departments/q-board-bath-panel-1850mm-600mm-30mm/1919355_BQ.prd

 

[acaciaguy]

Thank you guys. Appreciated

 

[Waluigi]

Just over a tenner for the long boards

 

[Bill]

Just over a tenner for the long boards

plus timber supports etc?

The 30mm version doesn't need any timber so that saves time and money.