sticking schluter ditra down to sub floor?? Amtico glue??

[Ajax123]

now I am in for some stick for getting my Ditra upside down aint I

 

[spooner68]

now I am in for some stick for getting my Ditra upside down aint I

Must be the full moon Ajax, it does funny things to ya

 

[SandyFloor]

Nowt worse than an upside down ditra

 

[micky106]

single part flex is wot im using also been rolled with vinyl roller. so should be ok. like to make sure it's all ok before i do it again on the next job as iv not done alot of ditra

 

[spooner68]

Unless it's high temperature adhesive it's very flexible. Actually there's another thing ....if it's over ufh it will need to be high temp adhesive which isn't flexible and has no grab whatsoever so I'm guessing unsuitable.

Getting confused as was commenting a UFH thread at the same time so made the obvious mistake.

 

[Ajax123]

Nowt worse than an upside down ditra

I can think of a few things but we not supposed to be rude on the forums.....

 

[Dan]

Just bumping this thread. If it's not a current topic then don't worry about it for now. Other threads like this can be found in the main tiling forum. If you do want to reply to it, please do. Your information may add value to somebody reading the forum in the future.