A
angrysmurf
Greetings oh knowledgeable ones,
I would like to tile a 2.5 x 2.5 sq m galley kitchen with 330mm sq porcelain tiles. It is an ex-local authority flat with a concrete floor, has some cracks in parts. I’ve run my spirit level over sections of the floor, and it seems level in some parts slightly unlevel in others, although there are no huge dips or bumps in the surface (a crack/depression near the door). This crack is about 2mm in width and 1mm height difference when measured using a tape measure and spirit level. The concrete is a bit dirty from drips of paint and so forth from other work i have done in the kitchen.
I have been advised to tile up to the cabinet plinth.
The tiles come from terrazzo tiles and I believe them to be very high quality Terrazzo-Tiles Online Tile Shop: 30cm*30cm*1cm I Qaurzi Almond, they are not polished but are "anti-slip". I poured water on a sample and half an hour later it was still on the surface.
My question is: can i get away with cleaning, sealing the concrete with PVC primer, and then using flexible powdered adhesive built to a sufficient level to overcome any uneveness or imperfections in the concrete? Will it be strong enough to support the porcelain tiles?
Since this is my first forray into floor tiling, I would appreciate any other tips/suggestions you may have about which particular tools and brands to use.
My appreciation to anyone who responds
I would like to tile a 2.5 x 2.5 sq m galley kitchen with 330mm sq porcelain tiles. It is an ex-local authority flat with a concrete floor, has some cracks in parts. I’ve run my spirit level over sections of the floor, and it seems level in some parts slightly unlevel in others, although there are no huge dips or bumps in the surface (a crack/depression near the door). This crack is about 2mm in width and 1mm height difference when measured using a tape measure and spirit level. The concrete is a bit dirty from drips of paint and so forth from other work i have done in the kitchen.
I have been advised to tile up to the cabinet plinth.
The tiles come from terrazzo tiles and I believe them to be very high quality Terrazzo-Tiles Online Tile Shop: 30cm*30cm*1cm I Qaurzi Almond, they are not polished but are "anti-slip". I poured water on a sample and half an hour later it was still on the surface.
My question is: can i get away with cleaning, sealing the concrete with PVC primer, and then using flexible powdered adhesive built to a sufficient level to overcome any uneveness or imperfections in the concrete? Will it be strong enough to support the porcelain tiles?
Since this is my first forray into floor tiling, I would appreciate any other tips/suggestions you may have about which particular tools and brands to use.
My appreciation to anyone who responds
