Metal trim ????? - TilersForums.com

[Shylo]

im doing a job on wednesday and the customer has been getting Metal Trims for around the Window. What tool would it be best to cut the metal trim so i can get a good clean finish??/

 

[DHTiling]

A standard hacksaw with a hss blade in.........and a mitre box

 

[rhyd4]

i got a macrist blade on my wet saw, i use that, much easyer not to go offline with it

 

[Gazzer]

i got a macrist blade on my wet saw, i use that, much easyer not to go offline with it

:whatchutalkingabout:whatchutalkingabout for metal trim?

 

[rhyd4]

yep, cuts metal threshholds too..give it a go

 

[DHTiling]

I wouldn't advise anybody to use a wet cutter to cut metal trims.........the deposits from the trim can clog the blade........they are not designed to cut metal , marcrist blade or not.....
Just use a hacksaw & mitre box or buy corner pieces.....

 

[Shylo]

You can use Metal Trim Cutters like Wall Plasterers use when when they cut the metal trim on the corner of a wall

 

[Gazzer]

Hacksaw and 32tpi blade.
Any form of snips will squash the trim in my opinion.

 

[andy-p]

i use a small mitre saw with a metal cutting blade, you can get a cheap one from b+q for about 30 squid..

 

[White Room]

You can use Metal Trim Cutters like Wall Plasterers use when when they cut the metal trim on the corner of a wall

I would,nt Shylo it will twist, buckle and bend using plasterers snips and will look awful