Insulation boards or Hardiebacker - TilersForums.com

[Sean Kelly]

I met a tiler who always used insulation boards instead of Hardiebacker.

I’ve got a job coming up next week that involves taking up 6mm ply (nailed & probably glued) to the floorboards. The kitchen units were then put on top!

I’ve quoted for Hardiebacker, but am now thinking that 6mm insulation boards glued to the floorboards would speed up insulation.

Any thoughts?

Cheers
Sean

 

[DHTiling]

10mm minimum thickness for timber floors.

 

[Perry]

i always use backer boards on floors not cement board but as Dave says min 10mm where is your job Sean ?

 

[Sean Kelly]

i always use backer boards on floors not cement board but as Dave says min 10mm where is your job Sean ?

A kitchen in Ruislip....................I never went back to that house in High Wycombe! (the one on that dodgy estate).

 

[Perry]

A kitchen in Ruislip....................I never went back to that house in High Wycombe! (the one on that dodgy estate).

you did finish It ? I have been using these boards on wooden floors for years always stick them down with a good bed just make sure you have the correct adhesive and primers if needed

 

[Sean Kelly]

you did finish It ?

I didn't even start it. I quoted 9 days for the job but the bloke I was working for only wanted to pay me for 6. So I said 'No thanks'.

 

[Perry]

I didn't even start it. I quoted 9 days for the job but the bloke I was working for only wanted to pay me for 6. So I said 'No thanks'.

A lot of that thing in High Wycombe area its a culture thing i never worked in high Wycombe always Beaconsfield Chalfonts Gerrards cross even out your way but theirs not much high end housing around Wycombe