fixing to metal what addy?

[kilty55]

evenin all,i have a question can you fix tiles to metal and if so what addy would be suitable for doing this??

 

[DHTiling]

A 2 part system....something like Mapei keraquick with latex plus additive...Or you could use Keralastic...

 

[kilty55]

great i use mapei keraquick white for my jobs anyway so do ctd sell the additive dave?

 

[DHTiling]

They should be able to get it yes......You replace the quantity of water with latex plus...thus giving one hell of a sticky adhesive....

 

[CJ]

Bal fastflex or topps do a 2 part made by Palace

 

[grumpygrouter]

great i use mapei keraquick white for my jobs anyway so do ctd sell the additive dave?

Aye, they do, I am picking mine up on Wednesday!

 

[Pawelzik]

I´ve read the (english UK) data sheet of Mapei´s Keraquick + Latex, I couldn´t find a recommandation for direct laying tiles on metal with this stuff !?:20:

Better ask the representatives of the adhesive makers, what to use and in which way (decoupling neccessary perhaps ?). From the German market I know that Dunlop was involved in making addys for ships - not cement based, it was either epoxy resin based or a polyurethane adhesive.

 

[grumpygrouter]

I´ve read the (english UK) data sheet of Mapei´s Keraquick + Latex, I couldn´t find a recommandation for direct laying tiles on metal with this stuff !?:20:

Better ask the representatives of the adhesive makers, what to use and in which way (decoupling neccessary perhaps ?). From the German market I know that Dunlop was involved in making addys for ships - not cement based, it was either epoxy resin based or a polyurethane adhesive.

It is in the chart in the Mapei "Little Black Book", saying it can be used on metal but recommends checking with the Mapei technical department first.

 

[Perry]

Thats the only time i use bal fastflex on metal but it depends what you doing as i done a 800 mtr computer floor a little while ago with large format porcelain tiles fastflex wasn't any good for that bed thickness and cost so i stuck Pecilastic down with PCI PKL324 then tiled on that with PTB rapid ete

 

[Perry]

I´ve read the (english UK) data sheet of Mapei´s Keraquick + Latex, I couldn´t find a recommandation for direct laying tiles on metal with this stuff !?:20:

Better ask the representatives of the adhesive makers, what to use and in which way (decoupling neccessary perhaps ?). From the German market I know that Dunlop was involved in making addys for ships - not cement based, it was either epoxy resin based or a polyurethane adhesive.

Martin i believe that was what bal call balflex of fastflex ete

 

[Alberta Stone]

What kind of metal?