Search the forum,

Discuss fitting dural ci++ in the Canada Tile Advice area at TilersForums.com.

S

s collins

ok the tuff form former is in and im now looking at tanking
im going with dural
so is this the right order for
 
S

s collins

fitting dural ci++ ?

ok the tuff form former is in and im now looking at tanking
im going with dural
so is this the right order for fitting
dural ci++(using this because of in screed heating) on floor then tape joint
then corners peices and joint from floor to wall with tape
then durabase wp to walls
do i need to tape the joints on the walls or just over lap ?
also what will i need to stick it down to floors and walls
and does it need primer on new screed and plaster
thanks simon
 
T

The Legend; Phil Hobson RIP

Hi Simon, I would use Mapei Keraquick and Latex plus on the floor to fix the Dural ci mat, what is the substrate on the walls? also what type of tiles are you thinking of using? Mapei is just my preferred adhesive, others may not agree.
 
S

s collins

Thanks phil
Not sure on floor tiles yet but wife wants mosaic
She has chosen large ceramic for walls
Which is new plaster
 
T

The Legend; Phil Hobson RIP

Hi Simon, skimmed plaster will only take 20kg per m2, just check the weight of your tiles.
 
S

s collins

Thanks I'll check weight before buying
Any more on the order of fitting the tanking ?
 
S

s collins

also how do you get the durabase ci++ in the the sealing ring on tuff form tray ?
 
J

JFRWhipple

also how do you get the durabase ci++ in the the sealing ring on tuff form tray ?

Same question different thread. I believe the Tuff Form is designed for a liquid membrane like Mapei's Aqua Defence or Mapegum WPS. A sheet membrane will buckle and wrinkle if clamped into a dish shape.

Perhaps your drain connection is different from mine here in Vancouver.

JW
 

Dan

Admin
Staff member
Reaction score
5,030
Points
1,318
Location
Staffordshire, UK
Just bumping this thread. If it's not a current topic then don't worry about it for now. Other threads like this can be found in the main tiling forum. If you do want to reply to it, please do. Your information may add value to somebody reading the forum in the future.
 

Reply to fitting dural ci++ in the Canada Tile Advice area at TilersForums.com

Or checkout our tile courses and training forum or the Tile Blog / Latest Blog Posts

There are similar tiling threads here

Hi all! Just wondering what the best advice is for book-keeping? Been self employed now for a...
Replies
1
Views
553
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
540
Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
744
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
590
10 Tiling Tips for Fixing Tiles to Bathroom Walls = From UKTilingForum.co.uk There are a few...
Replies
1
Views
653
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

New Tiling Questions

Replies you've not seen

Top