Cutting Metal Trim - TilersForums.com

[ChiversTiling]

I used to cut them in tiny metal mitre block, but got fed up with it as the 2.4m length trim moved alot using the hacksaw so I ended up making my own mitre block, what do you lads use to make your life easier, like hearing how other tilers do it there way

 

[White Room]

Just ordered one of these, they were designed by a tiler http://www.ebay.co.uk/itm/Genesis-m...qi=RTM1793693&clk_rvr_id=729696298645&afsrc=1

 

[ChiversTiling]

Looks ok, I might try and invent what I made, it's easy to use and stops the trim from moving and gets ya 45degrees spot on

 

[White Room]

The one I linked does exactly that....

 

[Stef]

There you go,



These were done in a blue homelux box..

I'm going to get the one that Deano designed when I'm back in CTD.
I was using my Quansol box today, I keep forgetting I have it..

 

[ChiversTiling]

Nice cuts but don't ya find that the length moves a lot?

 

[Stef]

Nice cuts í*½í±Œ but don't ya find that the length moves a lot?

Not if you hold it between your knees on the deck & hold the box tight & turn into a contortionist to cut it.. [emoji6] [emoji1][emoji1]

 

[peteablard]

I use my cordless grinder with a thin metal cutting blade

 

[trustiling]

As above, swap out the blade on the angle grinder for a thin dronco carbon blade and the worlds smallest combination square.
Window trimmed in ten minutes!

 

[Andy Allen]

Im going to try one of deans boxes...
Hes going to be retiring soon at this rate...lol