Advise On Trowel Type And Which Spacers For Quartz 600x600 Floor Tile - TilersForums.com

[Paul Panteli]

Hi,

Going to be installing over the next few weeks Gulf Quartz floor tiles 600x600 on a concentre floor in the kitchen.

Floor will be primed first and tiles back buttered.

I have read on this forum different opinions on which type of trowel and size to use - can you please advise best possible option please.

Also, i know min standard is 3mm for the spacers, should i be going for 3mm or 4mm? or is it simply a matter of preference

Appreciate your advise.

 

[Flintstone]

I would say 3mm is fine and that's what I would use, trowel wise, if the floor is nice and flat, a 12x12mm notch trowel should be spot on.

 

[Paul Panteli]

Thanks for the advice, does it matter if its a square or U shape trowel?

 

[Flintstone]

12mm square.

 

[Paul Panteli]

Great thank you.

 

[Flintstone]

You could go bigger if floor isn't perfect, I have just been doing one myself with same tile size and had to use 12x12 on floor and an 8x8 on the back of the tile too.

 

[Unused Account 1]

Did you put ditra mat down or not

 

[Stef]

How flat is your sub floor?
I've yet to see a concrete floor that doesn't need some slc on it.

 

[Unused Account 1]

Same here ,

 

[Paul Panteli]

Sorry I should have said that SLC will be laid just to level the floor. Do I still need a 12x12 trowel then?

 

[Flintstone]

Did you put ditra mat down or not

Me? No

 

[Stef]

I use a minimum 10mm square notch on a good substrate.
A 12mm trowel will do as you will end up with 2-3mm adhesive underneath.

 

[dynamictiling]

Something that I am surprised no one has mentioned. You should be using a latex adhesive for quartz.

 

[Paul Panteli]

Yes will be using the two part adhesive Keraquick with Latex.

 

[Kyle Knowles]

Tilemaster ultimate is rated for quartz I'd go with that coz all 2 part adhesive are miserable to use