Advice Needed - Is this Acceptable? - Tile Advice

[AOIS]

Please could someone advise if it’s common practise or acceptable for the tile joins not to meet as shown in the image attached?

 

[Dumbo]

Unless there is something else we can't see from this picture no its just lazy

 

[LM]

Are they the same format of tile?

 

[Flintstone]

Bigger picture would help to see what’s going on? Big silicone joint too ! Massive infact

 

[Dumbo]

Are they the same format of tile?

That is what I was trying to say . You're so much more eloquent than me .

 

[Blunt Tool]

Bigger picture would help to see what’s going on? Big silicone joint too ! Massive infact

That’s what a mastic man leaves.

 

[Andy Allen]

Is that Marc's mastic man..

 

[Blunt Tool]

Is that Marc's mastic man..

Seriously tho that is how wide a mastic man does it tho!

 

[Flintstone]

Looks way over the top. I’m sure it’s acceptable for a commercial staircase or some toilets in a restaurant but not in someone’s bathroom.

 

[Blunt Tool]

As for the op’s question the answer is no not acceptable to not have the joints aligned if same tile and size.

 

[John Benton]

Looks way over the top. I’m sure it’s acceptable for a commercial staircase or some toilets in a restaurant but not in someone’s bathroom.

It depends on the gap left between the tiles. If its a big one like we have seen before then it may need a bead that wide.

 

[One Day]

As for the op’s question the answer is no not acceptable to not have the joints aligned if same tile and size.

It is if your room isn't square!

 

[Blunt Tool]

It is if your room isn't square!

Never thought of that Mark.

 

[Blunt Tool]

It is if your room isn't square!

Ok as above and as long as the room is square! Anyone remember monty pythons what has the Romans done for us!

 

[AOIS]

Thanks for all your feedback. Here are two more pictures. Some of the other joints also don’t look great.