O
Old Mod
Utilising a shower former design I saw somewhere on line, a few months back I believe, I completed this wet room a few weeks ago.
It's a 1200 x600 x 10mm porcelain from Mandarin Stone.
The short walls I re-fabricated the 1200's down to 600's so that I could keep the bond with the floor.
All externals were mitred, of course, and the shower screen was sunk beneath the thing to give a completely frameless look.
One reason for the set out was that the drain and diverter were miss aligned, and a conventional set out would have highlighted this.
The window was actually offset to the joint line by approx 20mm also, but with a little jiggery pokery I was able to visually put it in the right place.
A lot of messing about? ..... yeah, maybe.
But the look on the clients face when completed, more than made up for the extra bit of hassle.
Plus they were a joy to work with.
It's a 1200 x600 x 10mm porcelain from Mandarin Stone.
The short walls I re-fabricated the 1200's down to 600's so that I could keep the bond with the floor.
All externals were mitred, of course, and the shower screen was sunk beneath the thing to give a completely frameless look.
One reason for the set out was that the drain and diverter were miss aligned, and a conventional set out would have highlighted this.
The window was actually offset to the joint line by approx 20mm also, but with a little jiggery pokery I was able to visually put it in the right place.
A lot of messing about? ..... yeah, maybe.
But the look on the clients face when completed, more than made up for the extra bit of hassle.
Plus they were a joy to work with.
