20mm exterior porcelain cutting - TilersForums.com

[Lakey]

quock question.
What is the best way to cut 20mm external porcelain?
Is there a mini grinder blade that will cope?

Cheers

 

[Unused Account 1]

Hello lakey ,for cuts i used a 9 inch angle grinder ,was fine

 

[Lakey]

What blade did you use?

 

[Italy]

It’s New tools tuesdays - https://www.tilersforums.com/threads/its-new-tools-tuesdays.84679/page-92
from here on

 

[Italy]

some photos here
https://www.tilersforums.com/media/users/antonio.45806/

 

[Lakey]

some photos here
https://www.tilersforums.com/media/users/antonio.45806/

Just called ATS who were no help at all. Which blade would you recommend mate?

 

[Italy]

Just called ATS who were no help at all. Which blade would you recommend mate?

do you have to make a lot of cuts?

 

[Lakey]

do you have to make a lot of cuts?

Not entirely sure yet.

 

[Lakey]

Not entirely sure yet.

Don’t think there will be loads

 

[Italy]

Not entirely sure yet.

20mm dry cut tends to overheat the blades,
the black blade in the trend posted above
it's the best I've tried.
also montolit tcs 115 is good.
otherwise if you have a water saw, use that

 

[Lakey]

20mm dry cut tends to overheat the blades,
the black blade in the trend posted above
it's the best I've tried.
also montolit tcs 115 is good.
otherwise if you have a water saw, use that

Thanks mate. Much appreciated

 

[Albert]

quock question.
What is the best way to cut 20mm external porcelain?
Is there a mini grinder blade that will cope?

Cheers

One of these will cut 20mm porcelain The Rubi TZ

 

[Concrete guy]

Yeah we don't sell Diatool blades, you'll find Diatool sell Diatool blades. We can't sell you something we don't make.

On the whole 20mm Porcelain is better cut wet rather than dry with a grinder.

 

[demi34]

I think better wet cutter

 

[Blunt Tool]

Wet cut 20mm porcelain
The diamond blade I got from @ATSDiamondTools for my Rubi ND200 cuts them very easily no chipping