Variable Speed Grinder - Tile Advice

[hmtiling]

Cheers guys

 

[J Sid]

Which model do you have Julian?

just checked 9565cvl, shame there not made anymore, good machine

 

[White Room]

You can still pick them up Makita 9565CVL 125mm Grinder Polisher (240v & 110v)

 

[Old Mod]

just checked 9565cvl, shame there not made anymore, good machine

What's the speed range Julian do u know mate?

 

[Old Mod]

What's the speed range Julian do u know mate?

It's ok just found it 2000-6800.

 

[WetSaw]

Just a hunch but I think it has this Speed range

 

[Old Mod]

Just a hunch but I think it has this Speed range

Well ok haha spec I read said 2000-6800 wasn't official makita site tho!
Thank you for being a smarty pants!
Haha cheers.

 

[WetSaw]

Can't seem to find the "Smug" emoji..

 

[Old Mod]

Can't seem to find the "Smug" emoji..

 

[Tile Shop]

Most of the non-variable speed grinders I've looked at have an RPM of 10000 upwards. Is there any advantage or disadvantage to cutting at 6800?

 

[Italy]

bosch is 2800- 11000

 

[Concrete guy]

Most of the non-variable speed grinders I've looked at have an RPM of 10000 upwards. Is there any advantage or disadvantage to cutting at 6800?

You need a slower speed range when cutting shaped or curve, particularly with dished blades. It reduces grabbing and kickback.

Also you'd run profiling tools at around 4000rpm, the reduced speed gives more control and allows the head of the tools to remain in contact with the work piece for longer. A profiler run on a normal grinder at 10,000 or 12,000 rpm kicks and bounces and is just difficult to control.

So if you want to sum it up in a single word - control.

Most variable speed grinders we sell are going to landscapers for profiling and shaping. The majority of polishers we sell go to stone masons. There is plenty of cross over though.

We also have heavy duty machines for companies that may be producing pool copings or similar, the FLEX LW802VR fits this category.

 

[MTiler]

I have a Metabo

 

[Stef]

I've got the Makita, same as Gary & Julian.
Also bought mine from Alan @ATSDiamondTools, very good machine.