Tips on using an angle grinder

[dg-1984]

Can anyone give any hints or tips on using an angle grinder for cutting tiles, bought a variable Bosch and premtool blade.
Have read about rotating the grinder and having the blade on the right as pull cutting can be more accurate on longer cuts. Also the dust etc is thrown away from you instead of towards.
Any hints or tips you have would be great.

 

[Flintstone]

Nor me.

 

[Dumbo]

Tutor cut , these guys are the masters

 

[Cranbrook]

I use these to hold my tiles in place when cutting with a grinder... Very handy

 

[Italy]

strange .... I have nothing to say ....
by now I have achieved peace of mind with the black blade.
so I can use the grinder as I want,
forward, backward, diagonally, battery-powered, 240v.
direct cutting, a few times 2 steps.
I always tend to make a clean cut at the beginning and at the end,
thus avoid the rupture with tiles with too much tension.
surely without water, I love dust.

 

[Italy]

however they also sell grinders
that stop in case of kickback.
for example if the blade breaks.

 

[Cranbrook]

strange .... I have nothing to say ....
by now I have achieved peace of mind with the black blade.
so I can use the grinder as I want,
forward, backward, diagonally, battery-powered, 240v.
direct cutting, a few times 2 steps.
I always tend to make a clean cut at the beginning and at the end,
thus avoid the rupture with tiles with too much tension.
surely without water, I love dust.

And me, always a little clean cut at the start and at the end