Tiling a swimming pool with Marble

[macca71]

Hi guys,
Virgin post!!!
I've been asked to tile an indoor swimming pool in honed matt marble. Is there anyone out there that's ever tiled a pool in marble? if so any advice would be appreciated. I'm guessing it's doable but tanking firstly and then natural stone sealants need to be tip-top??! What should my procedure be?
Thanks
Macca

 

[Gazzer]

I am sure Dave from Diamond Pool Finishers will be along shortly to advise on this one.

 

[Bubblecraft]

Hi & welcome to TF Dave from DPF is your man.

 

[Tony73]

Hi, as above DPF. But i think you don't need tanking, should be waterproof render.

 

[macca71]

Thanks guys, haven't tiled a pool before so slightly nervous! apparently the pool will be chemical free!! I await word from Diamond Dave!

 

[Concrete guy]

This really doesn't sound like a good idea to me.

When I imported marble we were asked about this a couple of times. It will need to be chemical free to start with, which you have.

The big question is what marble are they expecting you to use? You then need to check with the quarry/importer if it is suitable for a pool lining.

In pools you would usually use a fully vitrified product or similar, something with as near to zero absorption rate as possible, this is bacteria/health issue basically.

The answer is you can physically tile it with marble, should it be suitable is not actually a question you should be answering. That should be the supplier/specifier.

 

[Diamond Pool Finishers]

we have never had a problem with using marble before and we have done 20 + you must make sure you use the odourless sealers if poss, as tony said use integral waterproofer in the render/screed coats.
you say chemical free ! is it one of them swimming ponds ?.
outdoor ?.
indoor ?. anymore questions just ask away :hurray:

 

[Concrete guy]

You live and learn.

Chemical free.

Every time we were asked it had to be UV filtration, but that's standard these days isn't it?

I'm talking a few years ago when Chlorine was the norm and UV filtration was some odd new fangled thing.

 

[White Room]

Hi and welcome........

 

[macca71]

Hi guys,
Thank you very much for the advice, feeling a bit more confident about the project now. Apparently the tile manufacturer will not give a 100% guarantee that the marble is suitable for swimming pools!! BUT the client is very very keen on using the tile! .. i'm going to the site on Monday so will get a better picture of whats what then.. Diamond Dave, any tips on adhesives and grouts for pools? i'm used to using BAL and Mapei products but if there's a better option for pools i'd like to know..and if there's any pitfalls to watch out for with swimming pool tiling!!.. really appreciate your advice on this one. Macca