OK to fit-out my wet-room - Tile Advice

[White Room]

Is it a Gyproc Laminated Partition, built with 3 layers of board but it would'nt be 6mm plasterboard...there was a cement multi board stuff which was thin....

 

[Colour Republic]

If its cement board then I would have thought any old rawl plugs would do the job. Have you drilled in to it yet at all???

 

[Diamond Pool Finishers]

Is it a Gyproc Laminated Partition, built with 3 layers of board but it would'nt be 6mm plasterboard...there was a cement multi board stuff which was thin....

yes it must be then mark gyproc laminated partition looks like three layers of pb to me

 

[Diamond Pool Finishers]

If its cement board then I would have thought any old rawl plugs would do the job. Have you drilled in to it yet at all???

the first layer came off with the previous tiles, i then replaced around the shower area with mormox stuck on with addy, the dry areas i just re plaster boarded then tanked everything

 

[White Room]

yes it must be then mark gyproc laminated partition looks like three layers of pb to me

Don't think it's used anymore, awful stuff with a 19mm core board then 12.5mm either side....yuk

 

[Dan]

Don't mind me while I bump up some of the old threads. I wont be doing this much more. Just the last few in the Tile Drilling forum - How to Drill Porcelain Tiles. Just one of the many tiling advice forums.