Search the forum,

Discuss Levelling systems& large format in the Canada Tile Advice area at TilersForums.com.

G

GoneGuy

I would recommend using a levelling system, with the size of the tile as the adhesive drys and shrinks they will help prevent any lips
 
H

hmtiling

I can see I've hurt your feelings a wee bit lads. No offence intended.
I've always thought if you lay the tile properly they aren't required. Plus I've never thought they were cost effective and thought there was always the possibility of air gaps. Going to give them a go tomorrow though.
You haven't hurt my feelings buddy. I was very skeptical before I used them. The fact is they'll pull a tile down towards a well bedded tile rather than lift the other
 
W

Waluigi

Levelling clips are so cheap these days that I find it hard to find a reason not to use them, especially on tiles that size. Absolutely essential IMHO.
 

Tile Fix Direct

TF
TF Official Sponsor
Reaction score
153
Points
733
Location
Aldershot
The difficulty is that the levelling systems can result in voids under the tile. They are not a substitute for a perfectly flat floor, Solid bed trowel and back buttering the tile. Make sure the adhesive ribs run in straight lines and not 'Artex' style so trapped air can escape. When all this is done the levelling system can work well.
Don't forget to lift first tile laid to check you are achieving solid bed!
Genesis Easy Level System - https://www.tilefixdirect.com/product/Genesis-Easy-Level-System
 

Reply to Levelling systems& large format in the Canada Tile Advice area at TilersForums.com

There are similar tiling threads here

Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
624

Advertisement

New Tiling Questions

Replies you've not seen

Top