Currently reading:
Grinder dust extraction
Search the forum,
Using it a lot now Marc. Easy to transport and set up. Cuts every bit as well as my grinders and I get to stay inside and dust free.
Limitation is obviously the size.
Just a very very good little saw and after years of using grinders I had forgotten all about small wet saws!
Haha close Mark!
As if he'd drive a "van"!
There are a multitude of dust cowls out there for different uses.
But I also have it for floor grinding, and with a ‘Y’ connector you can run two angle grinders at once.
V-TUF BUDDY110 110v DustBuddy Dust Extractor M-Class 800w | eBay - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F391901759823
We had one too at home (hover) and I inherited it for DIY work until I destroyed it with brick dust, one of the issues with it was that it kicked out air under it - blowing everything around before you got to it.
I now use one of these Titan TTB430VAC 1400W 30Ltr Wet & Dry Vacuum Cleaner 240V | Wet & Dry Vacuums | NoLinksToThis - https://www.NoLinksToThis/p/titan-ttb430vac-1400w-30ltr-wet-dry-vacuum-cleaner-240v/70472 and that also blows as hard as it sucks with the same problem of chucking laying dust around so for inside work I connect an extra length of 32mm hose and route that out the window. Another good feature is the power take off that turns the hover on when you pull the tool trigger, and standard 32mm fittings
Discuss Grinder dust extraction in the Canada Tile Advice area at TilersForums.com.
O
Old Mod
O
Old Mod
Yeah.....I could Simon.
O
Old Mod
How you getting on with it Mark?
O
One Day
Using it a lot now Marc. Easy to transport and set up. Cuts every bit as well as my grinders and I get to stay inside and dust free.
Limitation is obviously the size.
Just a very very good little saw and after years of using grinders I had forgotten all about small wet saws!
O
Old Mod
O
Old Mod
You don't do things by halves do you Marc?!
What van are you driving?
One of these? (with a trailer of course)
Haha close Mark!
W
WetSaw
As if he'd drive a "van"!
O
Old Mod
Well I did ask if you still wanted a link.
Have one of those in the shed. It does glide but not a patch on the dyson
Saphiretiler
TF
O
Old Mod
It depends on the task I’m carrying out tbh.
There are a multitude of dust cowls out there for different uses.
But I also have it for floor grinding, and with a ‘Y’ connector you can run two angle grinders at once.
B
Blunt Tool
Marc @3_fall did share a link for a bargain M class extractor
V-TUF BUDDY110 110v DustBuddy Dust Extractor M-Class 800w | eBay - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F391901759823
The point is that you still have it after 50 years, I very much doubt that your Dyson will last 50 months.
We had one too at home (hover) and I inherited it for DIY work until I destroyed it with brick dust, one of the issues with it was that it kicked out air under it - blowing everything around before you got to it.
I now use one of these Titan TTB430VAC 1400W 30Ltr Wet & Dry Vacuum Cleaner 240V | Wet & Dry Vacuums | NoLinksToThis - https://www.NoLinksToThis/p/titan-ttb430vac-1400w-30ltr-wet-dry-vacuum-cleaner-240v/70472 and that also blows as hard as it sucks with the same problem of chucking laying dust around so for inside work I connect an extra length of 32mm hose and route that out the window. Another good feature is the power take off that turns the hover on when you pull the tool trigger, and standard 32mm fittings
Reply to Grinder dust extraction in the Canada Tile Advice area at TilersForums.com
There are similar tiling threads here
-
- Sticky
Water Damaged Shower Repairs
Shower tile repair – water damage – tile waterproofing
Do you have shower leakage that goes downstairs leading to either your main floor or basement? Read this blog...
- Tile Marble Granite
- America Tile Forum
- 0
- 2K
Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.