Fitting a glass panel using a u channel - TilersForums.com

[Stan7]

Are there any negatives to fitting a stainless steel u channel on top of a shower tray to support a glass panel? It will not be a wet room.

 

[Qwerty]

No negatives as such, but I advise you use a quality clear silicone or plastic channel seal. Ensure its well braced to the wall too

 

[Waluigi]

Why would you want to?

 

[Stan7]

Thanks, Plan Tec Tiling. It will be braced to the wall and a good quality clear silicone will be used.

Waluigi, because the glass panel comes with a clear plastic channel that I thought might get mucky.

 

[Waluigi]

I fit wet room panels to trays all the time. Never have I done anything other than rest the glass on the tray and clear silicone. A channel is another thing to get dirty IMO

 

[Stan7]

Thanks very much, that sounds like good advice. No channel will be used.

 

[LM]

Not to hijack the thread but in the opinion of you guys who install full bathrooms what silicones are the best out there for sticking, sealing anti mould etc?

 

[Qwerty]

Dow corning or Mapei

 

[Boggs]

Bal Micromax or Dow Corning.

 

[GoneGuy]

Dow Corning or mapei