festool diamond plunge cutter

[Old Mod]

£330 is pennies

Only if it works!
@martin1c has mixed feelings on the subject.

 

[Bathfix Bob]

Its basically an angle grinder mounted on base plate with dust extraction?

 

[Dumbo]

3 fall said he couldn't afford Festool, based on pictures of his work and his London location I disagreed with the statement.

@3_fall works for nothing and lives of his navy pension

 

[Old Mod]

Its basically an angle grinder mounted on base plate with dust extraction?

Yes it it mate, Martin last we spoke, said it was ok but didn’t rave about it.
Personally feel £330 can be better spent.
And you can achieve the same thing with a grinder, dust shroud and a straight edge.
Thats just way I look at it tho.

 

[Old Mod]

@3_fall works for nothing and lives of his navy pension

if only Jerry, if only!!

 

[Waluigi]

I’m a bit of a sucker for new tools but for some reason I don’t want the Festool as I can’t think of anywhere I’d use it.

 

[martin1c]

It's OK but not as good as I was hoping it would be. Don't bother with the stock blade. I've had best results with the Accumax blade.

I mainly use it for jobs where I want to do all cuts inside. Dust extraction is fairly good - I'd say 90% of the dust is extracted. One thing I would recommend is cutting the rubber seal on the track right back to the metal. As the blade gets so hot it can melt the seal which then gets into the cut and destroys the tile.

 

[GoneGuy]

@3_fall is this similar to the alphaprotoolsaw

 

[Old Mod]

@3_fall is this similar to the alphaprotoolsaw

No Adey, I don’t really think so.
@martin1c could probably clarify, but the festool appears to be a variable speed grinder with a flash cowling basically.
Whereas the Alpha is a beefed up version of the makita stone saw with wet feed or dry cut.
And has a dedicated rail system.

 

[nybor62]

if it don't do the job it goes back , you get 15 days money back guarantee with all festool