Search the forum,

Discuss Dry cutter not cutting straight all way along in the Tiling Tools | Tile Cutters, Trowels area at TilersForums.com.

tails123

TF
DIY Tiler
Reaction score
1
Points
38
Location
Altrincham
Hi there, been cutting 800 x 300 porcelain tile square cuts no problem for my bathroom walls however struggling to cut hex porcelain tiles corner to corner. The last 20 to 30mm breaks away from the score line. I checked the score and it does look or feel any different where the break veres off. Photo attached (ignore the jagged edge on rh tile I tried the nippers) Any advice welcome. Thanks.
 

Attachments

  • IMG-20191112-WA0006.jpg
    67.5 KB · Views: 36
  • IMG-20191112-WA0007.jpg
    79.5 KB · Views: 48

Tony_C

TF
Arms
Esteemed
Reaction score
2,128
Points
518
Location
Glasgow
Does your end that tails off always happen at the same end of the cutter? You may need to adjust your cutter for the correct height of the tile

Try double scoring the end that is not braking correctly. you could just be missing some pressure on the scoring action.

Try slowly breaking the tile with smaller push down actions with the breaker on the tile and slowly move up the tile doing the same instead of one swift snapping action.

wetcut/grind the top and tail then snap it providing you dont require both halves of the tile to be exactly half
 

Reply to Dry cutter not cutting straight all way along in the Tiling Tools | Tile Cutters, Trowels area at TilersForums.com

Advertisement

Tiling Tools

Find the cheapest price for both professional and DIY wall and floor tiling tools in the UK. Brands such as Rubi, Genesis, Fein, Karl Dahm, isomat, Schluter, Tilemaster and more.

New Tiling Questions

Replies you've not seen

Top