Advice Needed for shower set out please. - TilersForums.com

[Rusty10]

Hi

After a bit of advice from the pro's on how to layout new shower tiling project?

We have 500x200 ceramic tiles. My thought was to have a full tile centred plus 2 x 445 cuts (2mm grout lines) either side on the front wall (1395) running vertically (not brick pattern).

Each side wall is 785mm and this is where I really could do with some advice

Should we have a full tile with smaller cuts each side? A full tile with one 285mm cut (if so should we have the full left or right)? or go with 2 x 390 cuts?

Hope this makes sense & your help/advice would be greatly appreciated!

Cheers

 

[Dumbo]

How about full tile each cut to corner then grout line centre of rear wall . Cutting to corner. If you add back corner to side corner you have 482 so near as damn it a full tile wrap around.
I hope my maths is right as I did this quickly.

 

[Rusty10]

Thank you for the reply.

Hadnt even thought of doing it like that. I like it!