Husqvarna TS-230F running noisy - TilersForums.com

Search the forum,

Discuss Husqvarna TS-230F running noisy in the Tiling Tools | Tile Tools - Tile Installing Tools area at TilersForums.com.

Dan

Dan

Admin
Staff member
Reaction score
5,030
Points
1,318
Location
Staffordshire, UK
Any chance you could add a video to the thread of it running?

Film a short clip, then click the video button to add the video to a reply.

1598289733627.png
 
B

Broughty Tiler

Dymafo said:
Hai m8 where did you get the bearing from 👍
Click to expand...
Hi Dymafo - I just got it from a local bearings shop, but you should be able to buy them from pretty much anywhere.
It is NOT a manufacturer only part which is what I got told by Husqvarna, it is just a standard bearing.
The bearings that are fitted are actually dust repellent rated bearings, not water rated ones and the only difference is the seal on the sides of the bearing so I have replaced mine with a water repellent one so it should last longer now! :)
I believe the bearing identification number is - 6004C
 
B

BroughtyTiler

TF
Reaction score
9
Points
248
Location
Broughty Ferry, Dundee
Dymafo said:
Hai m8 where did you get the bearing from 👍
Click to expand...
Hi Dymafo,

I just got it from a local bearing supplier, it is just a standard bearing and NOT a manufacturer only part as I was told by Husqvarna.
The bearings fitted to this tile saw are only dust rated bearings which is fine for the back one, but the front one is water facing so I have replaced the old one with a water rated one on the blade side of the motor.
The identification number of the bearing I have used is - 6004C
Hope that helps.
Broughty Tiler
 
Lou

Lou

Admin
Staff member
Esteemed
Reaction score
862
Points
1,473
Location
Staffordshire
ttt tiling

ttt tiling

TF
Arms
Reaction score
90
Points
483
Location
brackley
BroughtyTiler said:
My Husqvarna TS-230F wet saw has suddenly started being a lot more noisy when running - could it be bearing nose on the motor? Has anyone else noticed this?
Cheers
Click to expand...
I’ve had two of these saws , best I’ve ever had , unfortunately no longer available , done the motor bearings on both , which is almost certainly the problem
Fidley job , I got an engineer friend to do mine
 

Reply to Husqvarna TS-230F running noisy in the Tiling Tools | Tile Tools - Tile Installing Tools area at TilersForums.com

Or checkout our tile courses and training forum or the Tile Blog / Latest Blog Posts

There are similar tiling threads here

P
UK Micro-cracks in new Self Leveling Compound
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
542
Dave
Dave
C
UK Book-keeping options?
Hi all! Just wondering what the best advice is for book-keeping? Been self employed now for a...
Replies
1
Views
554
Dan
Dan
M
UK Wet tile cutters for 1200x600 porcelain
Hi all. Just wanting some advice and wondering what the pros in here are using nowadays for...
Replies
2
Views
525
AliGage
AliGage
Dawz84
UK Main Water Leak Repair and Tiling Advice over Asphalt.
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
591
Tile Marble Granite
Tile Marble Granite
Dan
10 Tiling Tips for Fixing Tiles to Bathroom Walls = From UKTilingForum.co.uk
10 Tiling Tips for Fixing Tiles to Bathroom Walls = From UKTilingForum.co.uk There are a few...
Replies
1
Views
656
Dan
Dan

Advertisement

Share This Page

Tiling Tools

Find the cheapest price for both professional and DIY wall and floor tiling tools in the UK. Brands such as Rubi, Genesis, Fein, Karl Dahm, isomat, Schluter, Tilemaster and more.

New Tiling Questions

Replies you've not seen

Top