Search the forum,
Master EnSuite - 1st few boards now taped and filled
Master EnSuite - 120mm strip of HBB fixed with adhesive and screws (as with other boards) along the lowest side of the floor to make up the additional 8mm needed to level the floor. This will act as a runner for installing the levelling compound.
Master EnSuite - unfortnately floor is out of level and customer wanted a full wall tile up from the floor, so a bit of jiggery pokery necessary
Master EnSuite - all boards now nearly fixed, taped and filled
Master EnSuite - 1st few boards now taped and filled
Master EnSuite - The boards are screw fixed through the adhesive bed approximately every 150 - 200mm, then the joints of the 1st two boards taped and ready for filling
Master EnSuite - 1st two boards fixed into the adhesive bed
Master EnSuite - All boards cut, dry laid and removed - adhesive now serrated for first two boards
M

Master EnSuite - 1st few boards now taped and filled | Tiling Advice | TilersForums.com | Images & Downloads - TilersForums.com

There are no comments to display.
Wetroom Products And Shower Tray Formers
uHeat Electric and Water Underfloor Heating
Please visit our sponsor websites, they keep the forum free to use!

Media information

Album
Hardie Backerboard Floor Preparation
Added by
merlecollins
Date added
View count
353
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Posting a tiling question to the forum? Post in Tilers' Talk if you are unsure which forum to post in. We'll move it if there's a more suitable forum.
uHeat Electric and Water Underfloor Heating
Wetroom Products And Shower Tray Formers
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

Share This Page

Top